Brita Elite faucet filter review

Water Filter Portal

Brita Elite faucet filter review

Updated 14 Nov 2026 · How we check

We earn a commission on some links. It never changes our picks. As an Amazon Associate we earn from qualifying purchases. How we earn money

Quick answer

Brita’s faucet system (SAFF-100 and FF-100, sold as the Elite and Elite Advanced) clips onto a standard faucet. WQA lists it with the FR-200 filter under NSF/ANSI 53 for lead, asbestos and VOCs, under NSF/ANSI 401 for microplastics and six other compounds, and under NSF/ANSI 42 for chlorine. A filter lasts 100 gallons or about four months.

Skip it if: you want PFAS covered. The PUR PLUS is certified for total PFAS as well as lead, and its filters cost less per gallon.

It is one of our picks in Best faucet water filters. It replaces the older Brita Basic review on this page: the Basic was the same FF-100 system.

Brita Elite faucet system
Photo: Amazon
Certified for lead, rated for warmer water · Faucet water filters

Brita Elite faucet system

A faucet filter certified for lead, asbestos, VOCs and microplastics, rated for water up to 100 F, with a four-month filter.

Type
Faucet mount
Filter life
100 gallons or about 4 months
List price
$32.49

✓ Certified to NSF/ANSI 42, 53 and 401 (chlorine, lead, asbestos, VOCs, microplastics), confirmed in the certifier’s listing. Claims are from the WQA listing; life, limits and prices from Brita, checked 14 Nov 2026. Amazon’s price may differ.

What we like and what we do not

+ Good
  • WQA certified for lead, asbestos, VOCs and microplastics
  • Rated for water up to 100 F, warmer than most faucet filters
  • Electronic filter light; four-month time limit
  • Brita sells it directly with a 30-day money-back guarantee
− Not so good
  • Not certified for PFAS
  • About $15 of filter per 100 gallons
  • Does not fit pull-out or spray style faucets
  • At 8.25 inches tall it hangs low under the faucet

The facts

Certification✓ Certified by WQA for the Brita Faucet Filtration System FF-100 and SAFF-100 with the FR-200 filter to NSF/ANSI 42 (chlorine, particulate class I, taste and odor), NSF/ANSI 53 (lead, asbestos, chlordane, toxaphene, VOCs) and NSF/ANSI 401 (BPA, estrone, ibuprofen, naproxen, nonylphenol, phenytoin, microplastics); also NSF/ANSI/CAN 372. Not certified for PFASWQA listing, read 14 Nov 2026; Brita performance data
FilterFR-200; fits all Brita faucet systemsBrita filter page, 14 Nov 2026
Rated capacity100 gallons; Brita says about 4 months for most householdsBrita performance data, 14 Nov 2026; Brita filter page, 14 Nov 2026
Rated flow0.58 gallons a minute at 60 psiBrita performance data, 14 Nov 2026
Water and pressure34 to 100 F; 20 to 100 psiBrita performance data, 14 Nov 2026
Reduction in Brita’s dataLead 99.9%; asbestos 99.9%; VOCs 99.8%; microplastics 99.9%; chlorine 99.0%Brita performance data, 14 Nov 2026
FitsMost standard faucets without tools; not pull-out or spray style faucetsBrita product page, 14 Nov 2026; (Brita’s Amazon listing, 14 Nov 2026)
ModelsElite, chrome (SAFF-100/FF-100), $32.49; Elite Advanced, white (FF-100), $32.49, adds a spray settingBrita product page, 14 Nov 2026; Brita product page, 14 Nov 2026
Size6 x 8.25 x 2.38 in, 0.54 lb (chrome)Brita product page, 14 Nov 2026
Guarantee30 days, money back(Brita’s Amazon listing, 14 Nov 2026)
Replacement filtersFR-200, $17.99 for one, $29.99 for twoBrita filter page, 14 Nov 2026

Every fact shows where it came from and the date. Removal, life and flow figures are the maker’s unless the row says otherwise. We have not tested this filter ourselves.

What is in the box

The faucet system, one FR-200 filter and the adapters; the two-filter pack adds a second filter. (Brita product page, 14 Nov 2026)

Fitting it and first use

  1. Unscrew the aerator from your faucet.
  2. Fit the adapter that matches your faucet and attach the system by hand: no tools are needed.
  3. Click the FR-200 filter into the filter cup, lining up the groove with the indicator.
  4. Flush it with cold water for five minutes; Brita says the 100-gallon life starts after this flush.
  5. Watch the light: it shows when the filter is due. (Brita filter page, 14 Nov 2026; Brita product page, 14 Nov 2026)

Flow, water temperature and filter life

Brita rates the filter at 0.58 gallons a minute at 60 psi, a little faster than PUR. The lever switches to unfiltered water for washing up. (Brita performance data, 14 Nov 2026)

A filter lasts 100 gallons, about four months for most households, Brita says. At a gallon a day the 100 gallons come first, after a little over three months. (Brita performance data, 14 Nov 2026; Brita filter page, 14 Nov 2026)

It is rated for water from 34 to 100 F, the widest range of our picks, which suits a home where the cold tap runs warm in summer. (Brita performance data, 14 Nov 2026)

Filter changes and care

Changing the filter

Unclip the old FR-200, click in a new one and flush it for five minutes. Hard water can mean changing it sooner, Brita says. Two filters cost $29.99. (Brita filter page, 14 Nov 2026)

Cleaning

Wipe the housing with a damp cloth. Switch to unfiltered before running hot water.

Who it suits, and who should pick something else

Kitchens with a standard faucet that want lead covered, especially where the cold water runs warm.

People who prefer to buy from the maker: Brita sells the system and filters on its own site.

Pick something else if you want PFAS covered (the PUR PLUS), cysts (the Instapure F5), or your faucet pulls out (see our under sink guide).

How it compares with our other picks

Against the PUR PLUS: both are certified for lead and microplastics. The PUR adds total PFAS and costs less per gallon; the Brita is rated for warmer water and allows four months per filter.

Against the Instapure F5: the Instapure adds cysts but is not certified for VOCs or microplastics.

Top pick
PUR PLUS horizontal faucet system

Certified for lead and total PFAS. No list price published, checked 14 Nov 2026. Read our PUR PLUS review

Check price on Amazon
Certified for lead and cysts
Instapure F5 Complete faucet filter

Certified for lead and cysts. List price $29.95 at instapure.com, checked 14 Nov 2026. Read our Instapure F5 review

Check price on Amazon
Longest-lasting filter, for PFOA/PFOS
Culligan CULFMWH faucet mount

A 400-gallon filter, certified for PFOA/PFOS, not lead. List price $36.99 at True Value, checked 14 Nov 2026. Read our Culligan CULFMWH review

Check price on Amazon

All four picks are side by side in Best faucet water filters.

Size and running cost

We drew the system next to a 12 oz drink can from Brita’s dimensions, then worked out its running cost from Brita’s filter prices and rating. (Brita product page, 14 Nov 2026; Brita filter page, 14 Nov 2026)

5 in12 oz can2.6 x 4.8 inBrita Elite6 x 8.3 in
From left: 12 oz can (2.6 x 4.8 in); Brita Elite (6 x 8.3 in). Drawn to scale by Water Filter Portal from Brita’s dimensions, side view; it is 2.38 inches wide. (Brita product page, 14 Nov 2026)
Rated filter life100 gallons or about 4 monthsBrita performance data, 14 Nov 2026
Replacement filter$29.99 for two FR-200Brita filter page, 14 Nov 2026
Filter cost per 100 gallonsabout $14.99Our arithmetic
A year of filters at a gallon a day$54.73 (3.6 filters)Our arithmetic
A year of filters at 3 gallons a day$164.20 (10.9 filters)Our arithmetic

Rows marked “Our arithmetic” are our own calculation from list prices and the certifier’s or maker’s ratings, not a measurement. The gallons a day are our assumptions. Change the filter at the gallon rating or the time limit, whichever comes first.

Common questions

Is the Brita faucet filter certified for lead?

Yes. WQA lists the FF-100 and SAFF-100 with the FR-200 filter under NSF/ANSI 53 for lead. (WQA listing, 14 Nov 2026)

Does it remove PFAS?

It is not certified to. For a certified faucet filter, see the PUR PLUS. (WQA listing, 14 Nov 2026)

Elite or Elite Advanced?

Both take the FR-200 filter. The white Elite Advanced adds a spray setting; Brita sells both for $32.49. (Brita product page, 14 Nov 2026; Brita product page, 14 Nov 2026)

Is the old Brita Basic the same?

Yes: the Basic was the FF-100 system, and it takes the same FR-200 filter. (WQA listing, 14 Nov 2026; Brita filter page, 14 Nov 2026)

How hot can the water be?

Brita rates it from 34 to 100 F. (Brita performance data, 14 Nov 2026)

How we check

We research each product in depth: the maker’s specifications, manual and care instructions, the NSF, WQA and IAPMO certification listings, published independent field and lab tests, and what buyers report. We do not run a lab of our own, and we have not tested this filter ourselves. When a claim has no certification behind it, we say whose claim it is. More on how we check.

Sources

Makers, certifiers, public health bodies and retailers’ specification pages. A date after a link is the page’s own date where it has one. Otherwise it is the day we read it, 14 Nov 2026.

  1. Brita, Elite water filter faucet system product page, 14 Nov 2026
  2. Brita, Elite Advanced water filter faucet system product page, 14 Nov 2026
  3. Brita, faucet system performance data (FF-100, SAFF-100, FR-200), 14 Nov 2026
  4. Brita, water faucet replacement filters (FR-200), 14 Nov 2026
  5. WQA, Gold Seal listings for Brita, 14 Nov 2026