Fleck Iron Pro 2 Water Softener Review 2022

fleck-5600sxt-water-softener-review

This is our review of the Fleck Iron Pro 2 Water Softener.

We have considerable experience in water filtration systems so we researched the best water softener systems to help you out. In this article, we will give an in-depth look at the Fleck Iron Pro 2 Water Softener system to support your decision if this is the right water softener for you and your family.

The Fleck Iron Pro 2 Water Softener is a good solution if you need to deal with hard water and iron at the same time because this system not only softens the water but it can also remove up to 6 ppm of iron and manganese from the water. It includes a digital meter that allows you to monitor the salt and water usage levels, and to set up automatic regeneration. 

In this comprehensive Fleck Iron Pro 2 Water Softener review, we will analyze the system’s main features, the capacity, the flow rate, the installation & maintenance process, its warranty, discuss customer reviews, and potential alternatives for this water softener system.

Let’s get started!

Fleck Iron Pro 2 Water Softener Overview

The Fleck Iron Pro 2 Water Softener is a typical salt-based water softener that uses ion-exchange technology to deal with hard water. This means that the calcium and magnesium ions that cause water hardness are exchanged with sodium ions from the softening resin that resides in the tank.

When this resin is saturated with calcium and magnesium ions, it is flushed with salt water from the brine tank to flush down the ions and make the resin ready to start the softening process all over again.

Typically this system is installed at point-of-entry (POE) to soften the water before it enters the household.

What differentiates the Fleck Iron Pro 2 Water Softener from other water softener systems is its ability to remove other contaminants, like iron and magnesium, that typical water softeners cannot deal with.

If you add this to other great features like automatic regeneration, bypass valve, digital meter, a top water flow of 15 GPM, good capacity of 64.000 grains, and nice warranty coverage, all of this makes the Fleck Iron Pro 2 a good choice if you are looking for a water softener system.

Fleck Iron Pro 2 Water Softener Main Features

The Fleck Iron Pro 2 is a salt-based water softener system composed of a high-quality tank that contains the softening resin and a brine tank that contains the salt. The main tank is available in different colors.

This water softener not only softens your hard water but can also remove iron and manganese from the water. The fine mesh resin that deals with hard water is capable of removing up to 6 ppm of these 2 water contaminants.

Notice that two types of iron can be found in the water, ferrous and ferric. The Fleck Iron Pro 2 Water Softener can remove ferrous iron and partially remove ferric iron.

The fine mesh resin used in this water filter not only removes iron but since has a crosslinked resin of more than 8% (which is typical for most salt-based water softeners), it is more effective at removing water hardness and lasts longer than usual because it will resist better to the degradation caused by chlorine that is commonly found in municipal water.

The Fleck Iron Pro 2 includes a digital meter that allows monitoring water & salt usage and setting up the automatic regeneration of the system.

The automatic regeneration minimizes the amount of salt used and water wasted because instead of regenerating the softening media at a scheduled time, it regenerates it when it is needed, saving you a lot of money in the long run and contributing positively to the environment.

The Fleck Iron Pro 2 Water Softener system comes with a memory backup functionality which is great in case there is a power failure, as you won’t have to set up the system from scratch, you can just restore the previous settings from the backup.

Another great feature from the Fleck Iron Pro 2 is the inclusion of a bypass valve, which lets you control when you want to use or not the water softener. So if you want to water your lawn, there is no need to use the water softener and increase the usage of the system unnecessarily.

Fleck Iron Pro 2 Water Softener Capacity

This capacity of a water softener is called grain capacity as it is measured in grains per gallon (GPG), in which one grain represents 0.002 ounces of calcium carbonate in 1 gallon of water, so it directly relates to the amount of water it can soften.

Basically, it is the amount of minerals that the softening resin can hold until it needs to be regenerated with a regeneration cycle. So, a water softener with a lower capacity than required will need to be regenerated more frequently, while a water softener with more capacity might not be so effective.

The Fleck Iron Pro 2 Water Softener has a capacity of 64.000 grains which is ideal for an average-sized family.

As mentioned before, this water softener not only softens the water but can also remove iron and manganese from water up to 6 ppm.

Fleck Iron Pro 2 Water Softener Flow Rate

The flow rate represents how much water you will be able to use simultaneously in different activities without noticing a drop in water pressure.

The Fleck Iron Pro 2 Water Softener has a flow rate of up to 15 GPM (gallons per minute) which is more than enough for most families (which typically need around 9 GPM) and better than the average of a typical water softener.

 flow rate ranges from 11 to 20 GPM; depending on the model. The SS1 model comes with an 11 GPM flow rate, the SS4 model comes with a 13 GPM flow rate, and the SS+ model comes with a 20 GPM flow rate.

Fleck Iron Pro 2 Water Softener Installation & Maintenance

The Fleck Iron Pro 2 Water Softener can be installed by yourself, but it takes some effort because it will need to cut the pipes to connect this system to your waterline.

Make sure you have enough room to place the system and try to connect it near the main water inlet and a power source.

The Fleck Iron Pro 2 Water Softener comes with good instructions, and it offers phone and email support to support the installation, but if you are not a fan of these activities, it will be better to hire a plumber to install this system and make sure it is set up correctly.

The Fleck Iron Pro 2 Water Softener is easy to maintain, as it only requires regularly adding salt to the brine tank, according to the manufacturer’s instructions.

The softening resin should last for 5 years, so you only need to replace it after a few years of usage.

Fleck Iron Pro 2 Water Softener Warranty & Support

The Fleck Iron Pro 2 Water Softener includes good warranties, as it has a 10-year warranty for the tank, a 5-year warranty for the digital meter, and a 30-day satisfaction guarantee.

This package should give you some peace of mind if you decide to purchase this water softener system.

The company also offers good customer support by phone and email, and their site has helpful instructions if you need to troubleshoot any issue with the system. 

Fleck Iron Pro 2 Water Softener Reviews

This water softener device has an average rating of 4.5 stars on Amazon, with more than 400 customer reviews.

Notice that almost 90% of these reviews are 4 or 5 stars, which indicates that customers are very happy with the Fleck Iron Pro 2 Water Softener.

After reading several reviews we realized that customers were happy with the quality of their water, and noticed the removal of iron and hardness.

Fleck Iron Pro 2 Water Softener Alternatives

If the Fleck Iron Pro 2 Water Softener system isn’t the ideal solution for your household, there are other alternatives that you can consider.

SpringWell FutureSoft Salt-Free Water Softener

springwell-futuresoft-salt-free-water-softener

If you are looking for a salt-free water softener, the SpringWell FutureSoft is a nice alternative.

The SpringWell FutureSoft Salt-Free Water Softener is one of the best salt-free water softener systems available in the market, as it is capable of reducing up to 99% of scale buildup without needing salt or electricity to work, requires no maintenance, and offers a lifetime warranty.

SoftPro Elite Water Softener for Well Water

softpro-elite-water-softener-for-well-water

If you need to deal with well water in your household, the SoftPro Elite Water Softener for Well Water might be the right choice for you.

This highly efficient water softening system not only reduces water hardness but also removes iron and heavy metals from the water, making it the ideal choice to deal with well water. Apart from that, it includes nice features such as auto salt recharge or smart precision brining, and offers a lifetime warranty.

YARNA Capacitive Electronic Water Descaler System

If you prefer an electronic water descaler that you can install in a few minutes without having to cut pipes in your household, the YARNA Electronic Descaler is a good option.

The YARNA CWD24 Electronic Water Descaler is an affordable and easy to install device that prevents scale buildup, works with any water hardness level, is maintenance-free, does not impact the water flow in your household, and comes with a 1-year money-back satisfaction guarantee.

Our Verdict

We recommend the Fleck Iron Pro 2 Water Softener which was our choice for the best water softener for iron in our article about the best water softener systems.

The Fleck Iron Pro 2 is a salt-based water softener highly effective at softening water but can also remove iron and manganese, offers a great water flow of 15 GPM, has a capacity of 64.000 grains, includes nice features like a digital meter and automatic regeneration, and comes with a good warranty package.